Extra bed space for a guest It is not necessary to have a separate living room to create one. When the sofa bed is properly sized and placed, it can be used as a seating area during the day and as a single bed at night. The main thing is not to focus only on the closed dimensions of the furniture, but to plan in advance the area it occupies when opened and the movement space in the room.
From November onwards, home gatherings and family meetings increase. Instead of spreading a mattress and moving furniture at the last minute, it is more convenient to create a flexible zone with a permanent function. For this, the floor space in front of the pull-out furniture, the storage space for the bedroom set, nearby electrical outlets, and nighttime lighting should be considered together.
Where should the plan for an additional bed space for guests start?
First, identify the main pathways in the room. The line leading from the entrance door to another room, balcony, or window should not be completely blocked when the bed is opened. It is important for the guest to safely reach the door and light switch if they get up at night. If there is a rug, extension cord, or sharp-cornered coffee table on the floor, their placement should be checked separately in night mode.
Then, draw the day and night plans as two separate schemes. During the day, the armchair can be part of the seating area. When opened at night, the placement of the side table, ottoman, and decorative items should be predetermined. If the whole room needs to be rearranged every evening, the solution may not be considered practical for daily use.
How to set up an extra bed space for a guest step by step?
1. Mark the open size on the floor
Even though the armchair has a depth of 92 cm when closed, a length of 190 cm is required in bed mode. Mark a rectangle of 82×190 cm on the floor with tape. When opening the mechanism, check in the store if the armchair needs extra space from the front or back. The total space required to open the mechanism may not be the same as the bed size of the product.
2. Test the night passage
Consider the taped area as a bed and move toward the door with dimmed light. Check the risk of tripping over a foot on the coffee table, the edge of a rug, or a cable. If the door of the room cannot fully open when the bed is open, it is safer to change the direction of the armchair or choose another wall.
3. Determine the location of the bedroom set
Pillows, blankets, and the bedroom set should be kept in a place that is easy to access when a guest arrives and does not disrupt the daily appearance. Although it is confirmed on the product page that the Puma Armchair has a base, the internal dimensions of the base are not provided. Therefore, do not assume that the entire bedroom set will fit on the base; check its capacity before ordering.
4. Plan a nearby surface and lighting
A compact surface where the guest can place their phone, water, and glasses is useful. However, the side table should not obstruct the bed from opening. If you choose a table without wheels and heavy, designate a stable alternative spot for it at night. You can view compact coffee table models here.
5. Test the opening and closing process in real conditions
It is useful to open and close the mechanism several times in the store yourself. Get information about the ease of movement, the grip points, and the impact on the floor. Determine how close it is possible to place the product to the wall and other furniture. This reduces the risk of friction and pinching at home.
Practical approach: Arrange the room's layout not according to the chair's closed appearance, but according to the bed in its most challenging open position. If the night mode is comfortable, organizing the day mode will be easier.
Tips to increase comfort in a small apartment
Placing the opened armchair not directly in front of the door but in a quiet corner gives the guest more privacy. If a spot near the window is chosen, make sure it does not block the use of the curtain and radiator. During the cold season, placing the bed directly next to the heat source may reduce comfort and hinder air circulation.
Provide a small light source and an accessible power outlet for the night. Do not run an extension cord across the walkway. During the day, a decorative pillow can be added to the armchair, but for night mode, decide in advance where these pillows will be stored. You can view other armchair models here..
Recommended
- Check the open bed size with a tape measure.
- Keep a safe night passage to the door
- First choose the storage location for the bedroom set
- Open and close the mechanism in the store
Avoid
- Only look at the size of the closed armchair
- Keep the cable and coffee table out of the passage
- Estimate the capacity of the base
- Do not block the door and radiator
Checklist
- The closed and open dimensions of the armchair are recorded separately.
- The 82×190 cm bed area has been tested on the floor at actual size.
- When the bed is open, the door and main passage remain functional.
- There is surface space for nearby light, electrical outlet, and personal items.
- A place has been designated for storing the pillow and bedroom set.
- The opening mechanism and base capacity have been checked before ordering.
- The edges of the carpet, cables, and sharp corners do not pose a night-time hazard.
Frequently asked questions
What is the bed size when the Puma Armchair is unfolded?
The product page indicates a single bed area of 820×1900 mm. The total space required to open the mechanism should be tested separately at home.
Is the fold-out armchair suitable for nightly use?
This depends on the user's comfort needs and the product's construction. For long-term daily sleep, check the lying comfort in the store and the manufacturer’s recommendation separately.
Does the bed set fit in the base of the armchair?
The product page indicates that there is a base, but no internal dimensions are provided. Confirm that the pillow and covers will fit before ordering.
Where is it better to place a folding armchair in a small room?
Choose a quiet corner that does not block the door or main passage and has space in front equal to the length of the bed. The use of radiator, curtain, and electrical outlets should be preserved.
Conclusion
The main condition for creating an extra bed space for a guest is to plan the two modes together. The armchair should fit into the room's seating area during the day and, when opened at night, should maintain comfort for safe passage, lighting, and personal belongings. Testing the confirmed dimensions of the Puma Armchair on the floor with tape and clarifying the base capacity not shown before ordering helps make a more accurate decision.
Plan the guest area with real dimensions.
Compare the closed and open dimensions of the Puma Armchair with the available space in your room.
View the Puma Armchair →